Speaking of high-shear emulsifier, we must be familiar with it. It can be used for shearing and emulsification of various materials. It has been widely used in many industries, but high-shear emulsifiers can be divided into different applications. There are many types, and there are still some factors that will affect the operation of the emulsifier. Let's take a concrete look.

<1> Type of high shear emulsifier

The high shear mixing emulsifier is capable of producing a mixture having a larger particle diameter. The device has high shear efficiency and can ensure the stability of the mixture. The high shear mixing emulsifier can replace the stator and rotor of the equipment according to the actual operation requirements to meet the needs of different users.

2. High shear dispersing emulsifier

The high shear dispersing emulsifier is mainly used for the mixing of emulsions, and can emulsify a large amount of raw material emulsion into a fine granule suspension. The machine is operated with three working heads at the same time, and a narrow particle diameter can be obtained, so that the resulting mixture has high stability and is suitable for various operations.

3. High shear homogenizer

The emulsifier has a shear rate of up to 100.00 rpm and a working speed of up to 40 meters per second, which is not available in conventional shear emulsifiers. And the military emulsifier also uses a special motor, which can improve the shear efficiency of the equipment, reduce the range of particles to the nanometer level, and the applicable range becomes wider.

4. Dispersing emulsifier

The dispersing emulsifier is specially developed for the laboratory. It has basically the same parameters as many industrial equipments. The speed and angle of the working head are basically the same.

<2> Factors affecting the operating rate of the high shear emulsifier

1. The form of the emulsification head

The emulsification heads of different shear emulsifiers have a large degree of difference, because the emulsified head shape needs to be fully designed to meet the operation requirements according to the working environment and the need for emulsified materials.

2. Emulsification head shear rate

The shear rate of the emulsification head is mainly based on the choice of shear material. Some boring requires a higher shear rate, so the shear rate of the emulsification head should be increased a little to meet the needs of the actual operation.

The factors related to the operation of the high-shear emulsifier and the printing emulsifier have been specifically introduced in the above. More information about this can be found on the official website of our company for more detailed understanding.